收藏本站
Chapter 2 – AT Commands
Command:
Description:
+IPR
Fixed DTE Rate
This numeric extended-format parameter specifies the data rate at which the modem will
accept commands during online operation. It may be used to select operation at rates at
which the modem is not capable of automatically detecting the data rate being used by the
DTE.
Specifying a value of 0 disables the function and allows operation only at rates
automatically detectable by the modem. The specified rate takes effect following any
issued result code(s) associated with the current command line.
The <rate> specified does not apply in OnLine Data State if Normal Mode (Direct Mode) of
operation is selected.
Syntax: +IPR=<rate>
Values:
<rate>
Specifies the DTE-modem interface operation rate in bits/s. The available rates
are: 0, 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, or 230400.
If unspecified or set to 0, automatic detection is selected and the character format is also
forced to auto detect. +ICF=0.
If the specified rate is not supported by the modem, an ERROR result will be returned.
Report Commands:
+IPR? Reports current or selected values.
+IPR=? Reports supported range of parameter values.
Modulation Command
Command:
Description:
+MR
Modulation Reporting Control
This extended-format numeric parameter controls whether or not the extended-format
+MCR:<carrier> and +MRR:<rate> intermediate result codes are transmitted from the
modem to the DTE. If enabled, +MCR:<carrier> and +MRR:<rate> intermediate result
codes represent the current (negotiated or renegotiated) modulation <carrier> and <rate>
that are transmitted at the point during connect negotiation (handshaking) at which the
modem has determined which modulation and rate will be used; i.e., before any Error
Control or Data Compression reports are transmitted and before any final result code
(e.g., CONNECT) is transmitted.
S95 bit 2 is reset to 0 for +MR=0 and is set to a 1 for +MR=1 or +MR=2. The more recent
setting of +MR or S95 bit 2 and the W command setting determines modulation result
code reporting (see S95 Parameter and W Command).
Syntax: +MR=[<value>]
Values:
<value>
A decimal number corresponding to the selected option:
0 Disables reporting of modulation connection (+MCR: and +MRR: are not
transmitted). Default
1 Enables reporting of modulation connection (+MCR: and +MRR: are
transmitted with tx rate, rx rate).
2 Enables reporting of modulation connection (+MCR: and +MRR: are
transmitted with rx rate only).
Report Commands:
+MCR: Report Syntax:
+MRR: Report Syntax:
+MR? Reports current or selected values.
+MR=? Reports supported range of parameter values.
Response: +MCR: <carrier>
<carrier> Alphanumeric code corresponding to the reported carrier.
Defined values are:
B103 for Bell 103
B212 for Bell 212
V21 for V.21
V22 for V.22
V22B for V.22bis
V23C for V.23
V32 for V.32
V32B for V.32bis
V34 for V.34
V90 for V.90
V92 for V.92
Response: +MRR: <tx_rate>,<rx_rate>
<tx_rate> Decimal transmit rate in bits/s.
<rx_rate> Decimal receive rate in bits/s.
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273F)
24
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MT5692SMI-IP-92 V.92 SERIAL DATA ONLY
MT5692SMI-V-34 V.34 DATA/FAX SOCKET MODEM
MT5692SMI-X-L-92 V.92 SERIAL DATA
MT9234MU MODEM V.92 DATA/FAX USB WORLD
MT9234ZBA-NAM MODEM V.92 WORLD DATA/FAX
MT9234ZBA-USB-CP MODEM V.92 DATA/FAX USB WORLD
MT9234ZBA-USB MODEM V.92 DATA/FAX WORLD USB
MT9234ZPX-PCIE-CP MODEM V.92 DATA/FAX/VOICE WORLD
相关代理商/技术参数
MT5656ZDX-CP 功能描述:MODEM V.92 DATA/FAX 25 PACK RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-EU 功能描述:MODEM V.92 DATA/FAX EU BUNDLE RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-GB/IE 功能描述:MODEM V.92 DATA/FAX EK BUNDLE RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-NPS-CP 制造商:Multi-Tech Systems 功能描述:V.92 DATA/FAX MODEM (NO POWER SUPPLY) (25 MODEMS) - Bulk
MT5656ZDX-V 功能描述:MODEM V.92 VOICE/DATA/FAX RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-V-CP 制造商:Multi-Tech Systems 功能描述:V.92 VOICE/DATA/FAX MODEM (25 MODEMS) - Bulk
MT5656ZDX-V-EU 功能描述:MODEM V.92 DATA/FAX/VOICE BUNDLE RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-V-GB/IE 功能描述:MODEM V.92 DATA/FAX/VOICE BUNDLE RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装